/*!
 *     COPYRIGHT NOTICE
 *     Copyright (c) 2013,野火科技
 *     All rights reserved.
 *     技术讨论：野火初学论坛 http://www.chuxue123.com
 *
 *     除注明出处外，以下所有内容版权均属野火科技所有，未经允许，不得用于商业用途，
 *     修改内容时必须保留野火科技的版权声明。
 *
 * @file       FIRE_OV7725_Wolf.c
 * @brief      狼眼ov7725驱动代码
 * @author     野火科技
 * @version    v5.0
 * @date       2013-09-07
 */

#include "common.h"
#include "MK60_gpio.h"
#include "MK60_port.h"
#include "MK60_dma.h"
#include "FIRE_camera.h"

#define OV7725_WOLF_Delay_ms(time)  DELAY_MS(time)

uint8   *v7725_wolf_img_buff;

volatile IMG_STATUS_e      v7725_wolf_img_flag = IMG_FINISH;   //图像状态


//内部函数声明
static uint8 ov7725_wolf_reg_init(void);
static void ov7725_wolf_port_init();


/*!
 *  @brief      鹰眼ov7725初始化
 *  @since      v5.0
 */
uint8 ov7725_wolf_init(uint8 *imgaddr)
{
    v7725_wolf_img_buff = imgaddr;
    while(ov7725_wolf_reg_init() == 0);
    ov7725_wolf_port_init();
    return 0;
}

/*!
 *  @brief      鹰眼ov7725管脚初始化（内部调用）
 *  @since      v5.0
 */
void ov7725_wolf_port_init()
{
    //DMA通道0初始化，PTA27触发源(默认上升沿)，源地址为PTB_B0_IN，目的地址为：IMG_BUFF，每次传输1Byte
    dma_portx2buff_init(CAMERA_DMA_CH, (void *)&PTB_B0_IN, (void *)v7725_wolf_img_buff, PTA27, DMA_BYTE1, CAMERA_DMA_NUM, DADDR_KEEPON);

    port_init(PTA27, ALT1 | DMA_FALLING | PULLUP );         //PCLK

    DMA_IRQ_EN(CAMERA_DMA_CH);

    port_init(PTA29, ALT1 | IRQ_RISING | PULLUP | PF);     //场中断，上拉，上降沿触发中断，带滤波

    disable_irq(PORTA_IRQn);                        //关闭PTA的中断
}

/*!
 *  @brief      鹰眼ov7725场中断服务函数
 *  @since      v5.0
 */
void ov7725_wolf_vsync(void)
{

    //场中断需要判断是场结束还是场开始
    if(v7725_wolf_img_flag == IMG_START)                   //需要开始采集图像
    {
        v7725_wolf_img_flag = IMG_GATHER;                  //标记图像采集中
        disable_irq(PORTA_IRQn);

        DMA_EN(CAMERA_DMA_CH);                  //使能通道CHn 硬件请求
        DMA_DADDR(CAMERA_DMA_CH) = (uint32)v7725_wolf_img_buff;    //恢复地址
    }
    else                                        //图像采集错误
    {
        disable_irq(PORTA_IRQn);                        //关闭PTA的中断
        v7725_wolf_img_flag = IMG_FAIL;                    //标记图像采集失败
    }
}

/*!
 *  @brief      鹰眼ov7725 DMA中断服务函数
 *  @since      v5.0
 */
void ov7725_wolf_dma()
{
    v7725_wolf_img_flag = IMG_FINISH ;
    DMA_IRQ_CLEAN(CAMERA_DMA_CH);           //清除通道传输中断标志位
}

/*!
 *  @brief      鹰眼ov7725采集图像（采集到的数据存储在 初始化时配置的地址上）
 *  @since      v5.0
 */
void ov7725_wolf_get_img()
{
    v7725_wolf_img_flag = IMG_START;                    //开始采集图像
    PORTA_ISFR = ~0;                                    //写1清中断标志位(必须的，不然回导致一开中断就马上触发中断)
    enable_irq(PORTA_IRQn);                             //允许PTA的中断
    while(v7725_wolf_img_flag != IMG_FINISH)            //等待图像采集完毕
    {
        if(v7725_wolf_img_flag == IMG_FAIL)             //假如图像采集错误，则重新开始采集
        {
            v7725_wolf_img_flag = IMG_START;            //开始采集图像
            PORTA_ISFR = ~0;                            //写1清中断标志位(必须的，不然回导致一开中断就马上触发中断)
            enable_irq(PORTA_IRQn);                     //允许PTA的中断
        }
    }
}


/*OV7725初始化配置表*/
reg_s ov7725_wolf_reg[] =
{
    //寄存器，寄存器值次
    {OV7725_COM4         , 0x81},
    {OV7725_CLKRC        , 0x02},
    {OV7725_COM2         , 0x03},
    {OV7725_COM3         , 0xD0},
    {OV7725_COM7         , 0x40},
    {OV7725_HSTART       , 0x3F},
    {OV7725_HSIZE        , 0x50},
    {OV7725_VSTRT        , 0x03},
    {OV7725_VSIZE        , 0x78},
    {OV7725_HREF         , 0x00},
    {OV7725_SCAL0        , 0x0A},
    {OV7725_AWB_Ctrl0    , 0xE0},
    {OV7725_DSPAuto      , 0xff},
    {OV7725_DSP_Ctrl2    , 0x0C},
    {OV7725_DSP_Ctrl3    , 0x00},
    {OV7725_DSP_Ctrl4    , 0x00},

#if (CAMERA_W == 80)
    {OV7725_HOutSize     , 0x14},
#elif (CAMERA_W == 160)
    {OV7725_HOutSize     , 0x28},
#elif (CAMERA_W == 240)
    {OV7725_HOutSize     , 0x3c},
#elif (CAMERA_W == 320)
    {OV7725_HOutSize     , 0x50},
#else

#endif

#if (CAMERA_H == 60 )
    {OV7725_VOutSize     , 0x1E},
#elif (CAMERA_H == 120 )
    {OV7725_VOutSize     , 0x3c},
#elif (CAMERA_H == 180 )
    {OV7725_VOutSize     , 0x5a},
#elif (CAMERA_H == 240 )
    {OV7725_VOutSize     , 0x78},
#else

#endif

    {OV7725_EXHCH        , 0x00},
    {OV7725_GAM1         , 0x0c},
    {OV7725_GAM2         , 0x16},
    {OV7725_GAM3         , 0x2a},
    {OV7725_GAM4         , 0x4e},
    {OV7725_GAM5         , 0x61},
    {OV7725_GAM6         , 0x6f},
    {OV7725_GAM7         , 0x7b},
    {OV7725_GAM8         , 0x86},
    {OV7725_GAM9         , 0x8e},
    {OV7725_GAM10        , 0x97},
    {OV7725_GAM11        , 0xa4},
    {OV7725_GAM12        , 0xaf},
    {OV7725_GAM13        , 0xc5},
    {OV7725_GAM14        , 0xd7},
    {OV7725_GAM15        , 0xe8},
    {OV7725_SLOP         , 0x20},
    {OV7725_LC_RADI      , 0x00},
    {OV7725_LC_COEF      , 0x13},
    {OV7725_LC_XC        , 0x08},
    {OV7725_LC_COEFB     , 0x14},
    {OV7725_LC_COEFR     , 0x17},
    {OV7725_LC_CTR       , 0x05},
    {OV7725_BDBase       , 0x99},
    {OV7725_BDMStep      , 0x03},
    {OV7725_SDE          , 0x04},
    {OV7725_BRIGHT       , 0x00},
    {OV7725_CNST         , 0x20},
    {OV7725_SIGN         , 0x06},
    {OV7725_UVADJ0       , 0x11},
    {OV7725_UVADJ1       , 0x02},

};

uint8 ov7725_wolf_cfgnum = ARR_SIZE( ov7725_wolf_reg ) ; /*结构体数组成员数目*/


/*!
 *  @brief      鹰眼ov7725寄存器 初始化
 *  @return     初始化结果（0表示失败，1表示成功）
 *  @since      v5.0
 */
uint8 ov7725_wolf_reg_init(void)
{
    uint16 i = 0;
    uint8 Sensor_IDCode = 0;
    SCCB_GPIO_init();

    //OV7725_Delay_ms(50);
    if( 0 == SCCB_WriteByte ( OV7725_COM7, 0x80 ) ) /*复位sensor */
    {
        DEBUG_PRINTF("\n警告:SCCB写数据错误");
        return 0 ;
    }

    OV7725_WOLF_Delay_ms(50);

    if( 0 == SCCB_ReadByte( &Sensor_IDCode, 1, OV7725_VER ) )    /* 读取sensor ID号*/
    {
        DEBUG_PRINTF("\n警告:读取ID失败");
        return 0;
    }
    DEBUG_PRINTF("\nGet ID success，SENSOR ID is 0x%x", Sensor_IDCode);
    DEBUG_PRINTF("\nConfig Register Number is %d ", ov7725_wolf_cfgnum);
    if(Sensor_IDCode == OV7725_ID)
    {
        for( i = 0 ; i < ov7725_wolf_cfgnum ; i++ )
        {
            if( 0 == SCCB_WriteByte(ov7725_wolf_reg[i].addr, ov7725_wolf_reg[i].val) )
            {
                DEBUG_PRINTF("\n警告:写寄存器0x%x失败", ov7725_wolf_reg[i].addr);
                return 0;
            }
        }
    }
    else
    {
        return 0;
    }
    DEBUG_PRINTF("\nOV7725 Register Config Success!");
    return 1;
}